CLiKAPAD Recharge/Transportation Cases
The CLiKAPAD case design features a strong durable external fabric that is water resistant. Strong YKK zips are used to facilitate expansion.
The Base Case accommodates the SuperBase, Cables and Power Supply. The Power Supply output lead is channelled up into the second layer of the Case, referred to as the Intelligent Expander.
The second level of the Case accommodates up to 45 x CLiKAPADprioritizers and the charging process is performed via in-built Micro-USB sockets in the base of the case connected to a PCB that is sandwiched into the casing.
In this example 5 x CLiKAPADprioritizers have been inserted onto vertical Micro-USB connectors in the foam carry case and the charging process has commenced. The red light on the right of the keypads is the indicating that this BAY is being charged.
The four lights at the top indicate the progress. 1 x light = 25%, up to 4 fully lit = 100%. If it is flashing it is indicating progress. The Intelligent Expander also features a microprocessor (hidden from view) and a switch (yellow in full view) and through the flick of this switch you can change the charging method.
If you wish to expand your system to greater than 45 x CLiKAPADprioritizers then you add a further Standard Expander which zips on and is connected to the Intelligent Expander and thus to the Power Supply via a discrete ribbon cable, connecting the integrated PCBs to one another. The second expander would increase the capacity to 90 pads, add another and you have capacity for 135 x CLiKAPADprioritizers.